Schneider TSXPSY5500M Power Module

FAQ

Q1: What is the purpose of the TSXPSY5500M module?
A1: It is used to supply the necessary low‑voltage DC rails (5 V and 24 V) for a Modicon Premium PLC system, converting mains AC power into usable DC for the processor and I/O modules.

Q2: What input voltages does it support?
A2: It supports both 100‑120 V AC and 200‑240 V AC input ranges.

Q3: What are the available secondary outputs and their capacities?
A3: 5 V DC at up to ~7 A (35 W) and 24 V DC at ~0.8 A (19 W), total up to 50 W.

Q4: What kind of protection does the module provide?
A4: The module includes a time‑delayed primary fuse and secondary protections for overload, short‑circuit and over‑voltage.

Q5: What is the operating temperature range?
A5: 0 °C to +60 °C, and for storage ‑25 °C to +70 °C.

Q6: What is the module format and protection class?
A6: It is in the “Double” module format (wider than standard single) and has an IP20 protection rating.

Q7: What is the weight and approximate dimensions?
A7: Weight is 0.62 kg. Dimensions are 95 x 180 x 260 mm.

Q8: If one of the DC outputs fails, what happens?
A8: If the secondary output is overloaded or short‑circuited, the built‑in protection will interrupt that output. The mains side is also protected. The system may lose some DC rail power and this must be investigated and corrected.

Power Module Schneider TSXPSY5500M

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.