Epro PR6424/000-000+CON021/913-040 16mm Eddy Current Sensor

FAQ

Q1: How does the PR6424/000-000 + CON021/913-040 sensor detect shaft displacement?
A1: It uses eddy current principles to sense the distance between the sensor tip and the rotating shaft without physical contact, converting it into a proportional voltage signal.

Q2: Can the sensor handle high-speed machinery?
A2: Yes, the sensor is suitable for high-speed shafts and provides fast response to capture dynamic vibration changes.

Q3: How does the CON021/913-040 connector affect installation?
A3: The pre-assembled CON021/913-040 connector ensures precise alignment, secure mounting, and reliable signal transmission between the sensor and the monitoring system.

Q4: Is the sensor affected by temperature fluctuations in industrial environments?
A4: Within standard industrial temperature ranges, the sensor maintains accuracy. Extreme temperatures may require calibration adjustments.

Q5: Can the sensor detect both radial and axial shaft vibrations?
A5: It is primarily sensitive to radial displacement, but installation orientation can allow detection of certain axial vibration components.

Q6: How resistant is the sensor to electromagnetic interference or metallic debris?
A6: Its shielded design reduces electromagnetic interference, but large metallic particles near the tip can affect readings, so proper shielding or cleaning is recommended.

Q7: How is the analog output calibrated for displacement measurements?
A7: The voltage output is proportional to displacement, with scaling and zero-offset adjustments configurable in the connected monitoring system.

Q8: Can multiple sensors be used together for redundancy or cross-verification?
A8: Yes, several sensors can be installed on the same shaft to provide redundant monitoring and verify displacement and vibration measurements.

16mm Eddy Current Sensor Epro PR6424/000-000+CON021/913-040

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.