Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Product Model | Bently Nevada 330910-02-08-70-01-00 |
| Series | 3300 NSv Proximity Probes |
| Probe Tip Diameter | 8 mm |
| Probe Type | Non-contact eddy-current proximity probe |
| Sensing Principle | Eddy current displacement measurement |
| Measurement Range | ±1.0 mm typical linear range |
| Linear Range | 2 mm (approx.) |
| Sensitivity | 7.87 V/mm (nominal) |
| System Compatibility | Works with 3300 NSv Proximitor and extension cables |
| Target Material | AISI 4140 steel (standard) |
| Operating Temperature | −35°C to +177°C |
| Cable Type | Armored or non-armored depending on configuration |
| Cable Connector | Standard BNC or industrial coaxial connector |
| Shielding | Double-shielded low-noise cable |
| Typical Applications | Shaft vibration monitoring, position measurement, thrust monitoring, differential expansion |
| Total Length | 7.0 meters |
| Weight | 0.15 kg |
FAQ
FAQ
Q1: How does the long 7-meter cable affect signal transmission?
A1: The probe’s double-shielded cable maintains signal integrity over long distances, reducing noise and interference.
Q2: Is the 8 mm probe suitable for high-precision measurements?
A2: Yes, the 8 mm tip provides a good balance between size and sensitivity for precise displacement readings.
Q3: How should this probe be installed for accurate operation?
A3: It should be mounted perpendicular to the target surface with a consistent gap as specified by the system.
Q4: Can the probe be used in high-vibration environments?
A4: Yes, its robust construction and eddy-current sensing allow stable performance under high vibration conditions.
Q5: What type of maintenance does this probe require?
A5: Routine inspection of the probe tip, cable, and connectors is recommended; recalibration is only needed if the probe is physically damaged.
Q6: Can this probe measure shafts of varying materials?
A6: The probe is optimized for ferromagnetic materials such as AISI 4140 steel; measurements on non-ferrous materials may reduce accuracy.
Q7: Is this probe compatible with multiple 3300 NSv Proximitors?
A7: Yes, it can be integrated with any compatible 3300 NSv Proximitor system for multi-shaft monitoring.
Q8: How does the probe handle temperature variations?
A8: It operates reliably within the range of −35°C to +177°C, and the Proximitor compensates for minor temperature-induced signal drift.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
