Epro PR6424/010-120+CON021 16mm Eddy Current Sensor

FAQ

Q1: What is the PR6424/010-120 + CON021 system used for?
A1: It is used for high-precision, non-contact measurement of shaft radial and axial displacement, eccentricity, and vibration in rotating machinery.

Q2: What is the measurement range?
A2: Static ±2.0 mm, Dynamic 0–1,000 µm.

Q3: What is the system’s sensitivity and linearity?
A3: Sensitivity is 4 V/mm, linearity error up to ±1.5%.

Q4: What is the recommended nominal air gap during installation?
A4: Approximately 2.7 mm (from probe center to target).

Q5: What target materials are suitable?
A5: Ferromagnetic steel, such as 42CrMo4.

Q6: What is the minimum shaft diameter requirement?
A6: Minimum recommended shaft diameter is 80 mm.

Q7: What is the operating temperature range?
A7: Sensor -35°C to +150°C, Converter -30°C to +100°C.

Q8: What are the output type and frequency response of the CON021 converter?
A8: Output is selectable 0–10 V DC or 4–20 mA, frequency response 0–20,000 Hz, rise time < 15 µs.

16mm Eddy Current Sensor Epro PR6424/010-120+CON021

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.