Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Item | Specification |
|---|---|
| Model | Ovation 5X00701G02 |
| Product Type | Analog Output Module |
| Function | Digital-to-analog signal conversion for control outputs |
| Number of Channels | 8 |
| Output Signal Types | 0–10 V, 1–5 V, 4–20 mA |
| Output Resolution | 16-bit |
| Output Accuracy | ±0.1% full scale |
| Output Load Capacity | Voltage: ≥ 1 kΩ, Current: ≤ 600 Ω |
| Output Update Rate | < 20 ms |
| Isolation Type | Channel-to-system isolation |
| Drift | < 50 ppm/°C |
| Calibration | Software configurable |
| Overrange Protection | Supported |
| Output Stability | Long-term stable reference |
| Electrical Noise Rejection | High common-mode rejection |
| Communication Interface | Ovation system bus |
| Field Wiring Type | Plug-in terminal blocks |
| Mounting Method | Chassis mounted |
| Operating Temperature | -20°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5–95% RH |
| Power Requirement | Supplied by system backplane |
| Power Consumption | < 7 W |
| Dimensions (L × W × H) | 280 × 30 × 170 mm |
| Weight | 0.8 kg |
FAQ
FAQ
Q1: What is the primary role of this analog output module?
A1: It converts digital control values into precise analog signals for field instruments and actuators.
Q2: What output types are supported?
A2: The module supports both voltage and current output standards including 0–10 V and 4–20 mA.
Q3: Is channel isolation provided?
A3: Yes, each channel is isolated from the system to reduce noise and ground loop issues.
Q4: How accurate are the output signals?
A4: Outputs are controlled with high-resolution conversion and stable reference circuits for precision control.
Q5: Can output ranges be configured by software?
A5: Yes, all output ranges and scaling parameters are configured in the control system software.
Q6: How does the module handle electrical interference?
A6: It uses noise rejection circuits and stable internal references to maintain output signal integrity.
Q7: What happens if an output is overloaded?
A7: Built-in protection prevents damage and ensures stable recovery once the fault is removed.
Q8: Is calibration required after installation?
A8: Initial calibration parameters are factory set; recalibration is only required during long-term maintenance.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
