Bently Nevada 330104-00-11-50-02-05 8 mm 3300 XL Eddy-Current Proximity Probe

FAQ

Q1: What is the primary application of the 330104-00-11-50-02-05 probe?
It is used for non-contact measurement of shaft displacement and position in rotating machinery such as turbines, compressors, and pumps.

Q2: What does each part of the model number indicate?
“00” = unthreaded length 0 mm; “11” = 110 mm case length; “50” = 5.0 m cable; “02” = armored miniature connector; “05” = CSA/ATEX/IECEx approvals.

Q3: What materials are used in the probe?
The probe tip is PPS, and the housing is stainless steel with armored construction for industrial durability.

Q4: What operating temperature range is supported?
It operates between –52 °C and +177 °C.

Q5: What type of output does the probe provide?
When connected to a 3300 XL Proximitor, it outputs a voltage proportional to the gap between the probe and the shaft.

Q6: Is this probe suitable for hazardous-area applications?
Yes, the “05” suffix indicates compliance with CSA, ATEX, and IECEx certifications.

Q7: What is the typical measurement sensitivity?
Typical sensitivity is ~200 mV/mil (≈7.87 V/mm) with a linear range of 0.25–2.5 mm.

Q8: What are the size and weight specifications?
The probe has a 110 mm case length, an 8 mm tip diameter, and weighs approximately 1.0 kg with the 5 m armored cable.

330104-00-11-50-02-05 Bently Nevada

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.