Epro PR6424/000-000+CON021 16mm Eddy Current Sensor

FAQ

Q1: How does the PR6424/000-000+CON021 detect displacement?
A1: It uses eddy current principles to sense changes in distance between the sensor tip and the target shaft without physical contact.

Q2: What is the maximum speed of rotation this sensor can accurately monitor?
A2: The sensor is designed for high-speed shafts, typically up to tens of thousands of RPM, depending on system integration.

Q3: Can the sensor be affected by metallic debris or dust?
A3: While the sensor is non-contact, excessive metallic debris close to the tip can influence readings, so proper shielding or cleaning is recommended.

Q4: How is the analog output scaled?
A4: The output voltage is proportional to displacement; the exact voltage-to-distance ratio can be configured in the system electronics.

Q5: Can this sensor detect both axial and radial shaft vibrations?
A5: Yes, it is primarily sensitive to radial displacement, but depending on installation, it can also monitor axial shaft vibration components.

Q6: Does temperature variation affect sensor accuracy?
A6: Minimal effect occurs under standard industrial temperature ranges; extreme temperatures may require calibration compensation.

Q7: How is the sensor installed with the CON021 connector?
A7: The sensor head is connected via the CON021 pre-assembled connector, ensuring precise alignment and secure signal transmission.

Q8: Can this sensor be used in a redundant monitoring system?
A8: Yes, multiple sensors can be installed on the same shaft for redundancy and cross-verification of displacement and vibration measurements.

16mm Eddy Current Sensor Epro PR6424/000-000+CON021

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.