Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Manufacturer | Bently Nevada |
| Product Model | **Bently Nevada 3300 XL 8 mm Proximity Probe (configured as 330172-00-28-10-02-05) |
| Product Type | 3300 XL Series Eddy-Current Proximity Probe |
| Measurement Principle | Non-contact eddy-current displacement and vibration measurement |
| Probe Tip Diameter | 5 mm (small sensing tip for compact installations) |
| Thread Type | 1/4-28 UNF standard threaded mount |
| Case Length | ~28 mm rigid probe body (code “28” corresponds to a longer rigid housing) |
| Cable Length | 1.0 m (code “10”) miniature coaxial cable with ClickLoc connector |
| Connector Type | Miniature coaxial ClickLoc™ connector (code “02”) |
| Agency/Approval Code | “05” indicates standard industrial approvals/configuration |
| Linear Sensing Range | Up to ~2.0 mm (80 mils), begins ≈0.25 mm from target |
| Recommended Gap Setting | ~1.27 mm (50 mils) for optimal linear output |
| Sensitivity | ~7.87 V/mm (200 mV/mil) typical ±6.5 % over linear range |
| Frequency Response | DC to ~10 kHz with long field wiring |
| Operating Temperature Range | –35 °C to +177 °C typical industrial range |
| Environmental Protection | Robust industrial design (probe body stainless steel; connector seals required per installation) |
| Output Signal | Analog voltage proportional to target gap (requires conditioning via proximitor/electronics) |
| Dimensions (Probe Only) | Length ~28 mm × Diameter ~5 mm (probe body) + 1.0 m cable |
| Weight | ~0.25–0.35 kg depending on cable and connector assembly |
| Operating Environment | Designed for industrial rotating machinery vibration/position monitoring |
| Compliance | Compatible with Bently Nevada 3300 XL proximitor and monitoring electronics |
FAQ
FAQ
Q1: What is the Bently Nevada 330172-00-28-10-02-05?
A1: It is a 5 mm 3300 XL Series eddy-current proximity probe designed for precise non-contact shaft vibration and displacement measurement in industrial machinery condition monitoring systems.
Q2: What does each part of the model number signify?
A2: “28” designates the rigid body length (~28 mm), “10” indicates a 1 m integral cable, “02” specifies a miniature coaxial ClickLoc connector, and “05” refers to standard industrial approval/configuration.
Q3: What sensing range can this probe measure?
A3: The typical linear sensing range is approximately 0.25 mm to 2.0 mm from the target surface, depending on system gap settings.
Q4: What type of signal output does it provide?
A4: The probe outputs a raw analog voltage proportional to the gap/displacement; the signal must be conditioned by a proximitor sensor or monitoring electronics.
Q5: Can this probe operate in harsh industrial environments?
A5: Yes, it is built with a stainless steel body and industrial-rated cable, capable of operation over a wide temperature range (–35 °C to +177 °C) typical for machinery monitoring.
Q6: How long is the cable on this probe?
A6: The integral cable is approximately 1.0 meter long, providing flexibility in installation.
Q7: What connector is used on this probe?
A7: It uses a miniature coaxial ClickLoc connector for secure and reliable electrical connection to extension cables or proximitor inputs.
Q8: What additional components are needed to make it part of a complete measurement system?
A8: To establish a full condition monitoring loop, you need a compatible proximitor sensor and, if required, extension cables and monitoring electronics to condition, process, and analyze the signal.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
