Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Manufacturer | Bently Nevada |
| Product | **** (Representative armored 5 mm 3300 Series proximity probe; 330174‑00‑06‑10‑02‑CN is a similar configuration with country‑specific approval) |
| Product Model | 330174‑00‑06‑10‑02‑CN |
| Product Type | 3300 Series Eddy‑Current Proximity Probe |
| Measurement Principle | Non‑contact eddy‑current displacement and vibration sensing |
| Probe Tip Diameter | 5 mm (3300 Series standard) |
| Thread Size | M8 × 1 threaded mount |
| Unthreaded Length | 0 mm (code “00”) |
| Overall Case Length | 60 mm (code “06”) |
| Cable Length | 1.0 m (code “10”) |
| Connector Type | Miniature coaxial ClickLoc™ connector (code “02”) |
| Agency/Approval | CN = Country specific approvals included |
| Linear Sensing Range | ~0.25 mm – ~2.3 mm typical for 3300 Series 5 mm probes |
| Output Signal | Raw analog voltage proportional to gap/displacement (requires proximitor/conditioning electronics) |
| Operating Voltage | Typically –17.5 Vdc to –26 Vdc (standard 3300 5 mm transducer range) |
| Output Resistance | ≈50 Ω typical |
| Operating Temperature Range | –35 °C to +177 °C typical industrial operating limits |
| Housing Material | Stainless steel rugged industrial body |
| Cable Jacket | 75 Ω FEP‑insulated coaxial or triaxial cable |
| Dimensions (Overall) | Probe body ~60 mm long × ~5 mm diameter; cable ~1 m total |
| Weight | ~0.32 kg typical assembled |
| Operating Environment | Industrial rotating machinery condition monitoring |
| Compliance | Compatible with 3300 Proximitor and monitoring electronics |
FAQ
FAQ
Q1: What is the Bently Nevada 330174‑00‑06‑10‑02‑CN used for?
A1: It is an eddy‑current proximity probe for non‑contact measurement of shaft vibration/displacement used in industrial machine condition monitoring systems.
Q2: What does each segment of the model number mean?
A2: “00” indicates no unthreaded lead section, “06” is the 60 mm rigid body length, “10” is a 1.0 m cable, “02” is a miniature ClickLoc™ connector, and “CN” denotes country‑specific approvals.
Q3: How long is the integral cable on this probe?
A3: The integral cable is approximately 1.0 meter long, allowing connection to signal conditioning or monitoring electronics.
Q4: What type of connector does this probe use?
A4: It uses a miniature coaxial ClickLoc™ connector (“02”), which ensures secure and repeatable field connections.
Q5: What is the typical sensing range of this proximity probe?
A5: Typical linear sensing range for a 3300 Series 5 mm probe is roughly 0.25 mm up to about 2.3 mm from the target surface.
Q6: What environments can this probe operate in?
A6: It is built for rugged industrial environments, capable of operating in wide temperature conditions common to rotating machinery monitoring.
Q7: What signal does this probe output?
A7: The probe outputs a raw analog voltage proportional to the target gap/displacement, which must be conditioned by a proximitor or monitoring electronics.
Q8: What additional components are needed to use this probe?
A8: To form a complete measurement system, you need a compatible proximitor conditioning sensor and monitoring electronics to condition, interpret, and analyze the raw signal.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
