GE IC200UEX624 Analog Expansion Input Module

FAQ

Q1: What is the GE Fanuc IC200UEX624 used for?
The IC200UEX624 is an analog expansion module designed for VersaMax Micro PLC systems. It adds four analog input channels, allowing the PLC to read signals from devices such as pressure transmitters, flow meters, level sensors, and other process instruments.

Q2: How many analog inputs does the IC200UEX624 provide?
The module provides 4 analog input channels. Each channel can measure voltage or current signals depending on the configured application.

Q3: What input signals are supported by the IC200UEX624?
The module supports 0–10 VDC voltage inputs and 0–20 mA / 4–20 mA current inputs, making it suitable for common industrial analog instrumentation.

Q4: What is the resolution of the IC200UEX624 analog inputs?
The module uses a 12-bit analog-to-digital converter, providing 4096 possible digital measurement values for analog signal conversion.

Q5: Does the IC200UEX624 require an external power supply?
Yes. The module requires a 24 VDC power supply, with an allowable operating range of 19.2–30 VDC. The power supply rating is approximately 3 W.

Q6: Is the IC200UEX624 input electrically isolated?
No. The analog inputs are non-isolated, so proper grounding and signal wiring practices are required to reduce electrical noise and measurement errors.

Q7: What does the IC200UEX624 connect to?
The module connects directly to a GE Fanuc VersaMax Micro PLC expansion interface and is used to increase the PLC’s analog input capacity without adding a separate rack system.

Q8: What should be checked before replacing an IC200UEX624 module?
Before replacement, verify the VersaMax Micro PLC compatibility, 24 VDC power supply condition, analog signal type (voltage or current), channel wiring, scaling parameters, and grounding configuration to ensure accurate analog measurement after installation.

GE IC200UEX624

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.