Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | GE Fanuc (now Emerson Automation) |
| Product Model | IC200MDL750G |
| Product Type | Discrete DC Output Module |
| Series | VersaMax I/O |
| Function | Provides digital DC output signals for controlling external field devices in VersaMax PLC systems |
| Output Type | Positive Logic Transistor Output (Sourcing) |
| Number of Output Points | 32 points |
| Output Groups | 2 groups of 16 outputs |
| Nominal Output Voltage | 12/24 VDC |
| Output Voltage Range | 10.2–30 VDC |
| Output Current | 0.5 A maximum per point |
| Minimum Load Current | 0.5 mA per point at 30 VDC |
| Inrush Current | 2.0 A maximum for 100 ms |
| Output Leakage Current | 0.5 mA maximum at 30 VDC |
| ON Response Time | 0.2 ms maximum |
| OFF Response Time | 1.0 ms maximum |
| Output Voltage Drop | 0.3 V maximum |
| Isolation | 250 VAC continuous; 1500 VAC for 1 minute (field side to logic/frame ground) |
| Group Isolation | No channel-to-channel isolation |
| External Power Supply | 10.2–30 VDC (12/24 VDC nominal) |
| Backplane Current Consumption | 90 mA maximum @ 5 VDC |
| Protection | External suppression recommended for inductive loads |
| LED Indicators | Individual output status LEDs, OK LED, FLD PWR LED |
| Module Diagnostics | Field power monitoring and module status indication |
| Mounting Method | VersaMax Carrier Base / DIN Rail Mounting |
| Compatible Systems | GE Fanuc / Emerson VersaMax PLC and Distributed I/O |
| Hazardous Location Rating | Class I Division 2 / Zone 2 applications |
| Operating Temperature | 0°C to +60°C (32°F to +140°F) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Relative Humidity | 5–95% RH (non-condensing) |
| Dimensions (H × W × D) | Approx. 110 × 66.8 × 50 mm (4.33 × 2.63 × 1.97 in.) |
| Weight | Approx. 0.14 kg (0.31 lb) |
| Hardware Revision | G |
| Product Status | Legacy Product |
| Warranty | 12 Months |
FAQ
FAQ
Q1: What is the GE Fanuc IC200MDL750G used for?
The IC200MDL750G is a VersaMax discrete output module used to control 12/24 VDC field devices. It converts PLC output commands into electrical signals for actuators, relays, solenoid valves, and other industrial loads.
Q2: How many output channels does the IC200MDL750G provide?
The module provides 32 transistor output points, arranged as two groups of 16 outputs. Each output channel can be independently controlled by the PLC program.
Q3: What voltage and current ratings does the IC200MDL750G support?
The module supports 12/24 VDC operation with an output voltage range of 10.2–30 VDC. Each output point can handle up to 0.5 A of current.
Q4: Does the IC200MDL750G require an external power supply?
Yes. The module receives internal operating power from the VersaMax backplane, while an external 12/24 VDC field power supply is required to drive connected output devices.
Q5: What type of output technology does the IC200MDL750G use?
The IC200MDL750G uses positive logic transistor outputs, also known as sourcing outputs. When activated, the module supplies positive DC voltage to the connected load.
Q6: What diagnostic indicators are available on the IC200MDL750G?
The module includes individual channel LEDs to show output status, an OK LED for module power status, and an FLD PWR LED to indicate the presence of external field power.
Q7: What does the “G” revision indicate?
The “G” suffix identifies the hardware revision of the IC200MDL750 output module. Different revision levels represent production updates while maintaining compatibility with VersaMax systems.
Q8: What should be checked before replacing an IC200MDL750G module?
Before replacement, verify the VersaMax carrier compatibility, 12/24 VDC field power supply, output load current requirements, wiring connections, suppression components for inductive loads, and PLC hardware configuration to ensure proper operation after installation.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
