Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | GE Fanuc (now Emerson Automation) |
| Product Model | IC695MDL753 |
| Product Type | Discrete Output Module |
| Series | PACSystems RX3i |
| Function | Provides high-density digital output signals for controlling field devices such as relays, solenoids, contactors, and indicator lamps |
| Output Type | Positive Logic (Sourcing) Transistor Outputs |
| Number of Output Points | 32 points |
| Output Groups | 4 isolated groups of 8 outputs |
| Rated Output Voltage | 12/24 VDC |
| Output Voltage Range | 12 to 24 VDC nominal (10.2–30 VDC operating) |
| Maximum Output Current | 0.5 A per point |
| Maximum Group Current | 4 A per group |
| Maximum Module Current | 8 A total |
| Output Leakage Current | 1 mA maximum |
| ON-State Voltage Drop | 0.5 V maximum |
| OFF-to-ON Response Time | 0.5 ms maximum |
| ON-to-OFF Response Time | 0.5 ms maximum |
| Isolation | 250 VAC continuous between field side and backplane; group-to-group isolation |
| Short-Circuit Protection | Electronic protection with fault diagnostics |
| Diagnostic Features | Output fault detection, field power monitoring, module diagnostics |
| LED Indicators | 32 individual output LEDs and Module OK LED |
| External Power Supply | User-supplied 12/24 VDC |
| Backplane Current Consumption | Approx. 120 mA @ 5 VDC |
| Terminal Block | 36-pin front removable terminal block |
| Module Width | Single-slot RX3i module |
| Compatible Systems | GE Fanuc / Emerson PACSystems RX3i |
| Installation Location | Any RX3i universal backplane I/O slot |
| Operating Temperature | 0°C to +60°C (32°F to +140°F) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Relative Humidity | 5–95% RH (non-condensing) |
| Dimensions (H × W × D) | Approx. 130 × 35 × 140 mm (5.12 × 1.38 × 5.51 in.) |
| Weight | Approx. 0.30 kg (0.66 lb) |
| Product Status | Legacy Product |
| Warranty | 12 Months |
FAQ
FAQ
Q1: What is the GE Fanuc IC695MDL753 used for?
The IC695MDL753 is used to provide 12/24 VDC digital output signals for controlling field devices such as relays, solenoid valves, contactors, indicator lights, and other DC-operated equipment in PACSystems RX3i applications.
Q2: How many output channels does the IC695MDL753 provide?
The module provides 32 digital output channels, arranged in four isolated groups of eight outputs, allowing flexible wiring and improved load distribution.
Q3: What type of outputs does the IC695MDL753 support?
The module features positive logic (sourcing) transistor outputs, designed for switching 12/24 VDC loads with fast response times and high reliability.
Q4: What is the maximum output current of the IC695MDL753?
Each output point can supply up to 0.5 A, with a maximum of 4 A per output group and 8 A total for the module when operating within specified environmental limits.
Q5: Does the IC695MDL753 include diagnostic functions?
Yes. The module supports built-in diagnostics, including output fault monitoring, field power detection, and module health reporting. Individual output LEDs and a Module OK LED simplify troubleshooting.
Q6: Does the IC695MDL753 require an external power supply?
Yes. The module requires a 12/24 VDC external field power supply to energize the connected output loads, while the RX3i backplane supplies power for the module electronics.
Q7: Is the IC695MDL753 compatible with all PACSystems RX3i CPUs?
Yes. The IC695MDL753 is designed for the PACSystems RX3i platform and can be installed in any compatible RX3i universal backplane I/O slot, provided the CPU firmware supports the module.
Q8: What should be checked before replacing an IC695MDL753 module?
Before replacement, verify the RX3i backplane compatibility, output wiring, field power supply voltage, load current requirements, terminal block connections, and PLC hardware configuration. After installation, confirm that the output addressing and diagnostics match the application requirements.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
