Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | GE Fanuc (now Emerson Automation) |
| Product Model | IC693MDL742E |
| Product Type | Discrete DC Output Module |
| Series | Series 90-30 |
| Function | Provides 12/24 VDC positive logic transistor outputs for controlling industrial DC loads |
| Output Type | Positive Logic (Sourcing) Output |
| Protection Type | Electronic Short Circuit Protection (ESCP) |
| Number of Output Points | 16 points |
| Output Groups | 2 groups of 8 outputs |
| Rated Output Voltage | 12/24 VDC |
| Output Voltage Range | 12 to 24 VDC (+20%, -15%) |
| Output Current | 1 A maximum per point |
| Maximum Group Current | 4 A per group at 50°C; 3 A per group at 60°C |
| Output Voltage Drop | 1.2 V maximum |
| Off-State Leakage Current | 1 mA maximum |
| Inrush Current | 5.2 A for 10 ms maximum |
| ON Response Time | 2 ms maximum |
| OFF Response Time | 2 ms maximum |
| Isolation | 1500 VAC between field side and logic side; 500 VAC between output groups |
| Short Circuit Protection | Electronic protection on output groups with fault indication |
| Diagnostic Function | Short circuit detection and output status monitoring |
| LED Indicators | Individual output status LEDs (16 points) and fault indication LED |
| Backplane Current Consumption | 130 mA maximum from 5 VDC bus (all outputs ON) |
| External Power Supply | User-supplied 12/24 VDC field power |
| Compatible Loads | Motor starters, solenoid valves, relays, indicator lamps and DC actuators |
| Installation Position | Any Series 90-30 I/O slot except power supply and CPU positions |
| Compatible Systems | GE Fanuc Series 90-30 PLC |
| Mounting Method | Rack-mounted module |
| Operating Temperature | 0°C to +60°C (32°F to +140°F) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Relative Humidity | 5–95% RH (non-condensing) |
| Dimensions (H × W × D) | Approx. 130 × 35 × 127 mm (5.12 × 1.38 × 5.00 in.) |
| Weight | Approx. 0.26 kg (0.56 lb) |
| Hardware Revision | E |
| Product Status | Legacy Product |
| Warranty | 12 Months |
FAQ
FAQ
Q1: What is the GE Fanuc IC693MDL742E used for?
The IC693MDL742E is used in Series 90-30 PLC systems to control 12/24 VDC field devices such as solenoid valves, relays, contactors, motor starters, and indicator lamps.
Q2: How many output channels does the IC693MDL742E provide?
The module provides 16 discrete output points, arranged as two groups of eight outputs with separate common power terminals for each group.
Q3: What type of outputs does the IC693MDL742E support?
The module uses positive logic (sourcing) transistor outputs, meaning it supplies current from the positive power bus to connected field loads.
Q4: What is the maximum output current of the IC693MDL742E?
Each output point can handle up to 1 A maximum current. The maximum current per group is 4 A at 50°C and 3 A at 60°C.
Q5: Does the IC693MDL742E have short circuit protection?
Yes. The module includes Electronic Short Circuit Protection (ESCP), which monitors output groups, protects the module from damage, and provides fault indication when a short circuit occurs.
Q6: Does the IC693MDL742E require an external power supply?
Yes. The module requires a user-provided 12/24 VDC field power supply to energize connected output devices. The PLC backplane supplies power only for the module electronics.
Q7: What devices can be connected to the IC693MDL742E outputs?
The module can drive industrial DC loads including motor starters, solenoids, relay coils, valves, and status indicators commonly used in automation systems.
Q8: What should be checked before replacing an IC693MDL742E module?
Before replacement, verify the Series 90-30 rack compatibility, 12/24 VDC field supply, output wiring, load current requirements, terminal connections, and PLC hardware configuration to ensure correct operation after installation.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
