Allen Bradley 1783-ETAP2F EtherNet/IP Fiber Tap

FAQ

Q1: What is the Allen-Bradley 1783-ETAP2F used for?
A: The 1783-ETAP2F is used to connect single-port EtherNet/IP devices to a Device Level Ring (DLR) network, improving network availability and reducing downtime through fast ring recovery.

Q2: What network ports are available on the 1783-ETAP2F?
A: The unit features one 10/100 Mbps RJ45 copper Ethernet port and two 100Base-FX LC multimode fiber ports, allowing both copper and fiber network connections.

Q3: Does the 1783-ETAP2F support Device Level Ring (DLR)?
A: Yes. It fully supports Device Level Ring (DLR) and linear network topologies, providing network redundancy with recovery times of less than 3 ms under typical operating conditions.

Q4: What power supply is required for the 1783-ETAP2F?
A: The device operates from a 24 VDC power supply with an acceptable input range of 20.4 to 27.6 VDC, consuming a maximum of 260 mA and 6.24 W.

Q5: What type of fiber connection does the 1783-ETAP2F use?
A: It uses 100Base-FX multimode fiber with LC connectors, operating at a 1310 nm wavelength and supporting transmission distances up to 2 km with compatible multimode fiber.

Q6: What are the dimensions and weight of the 1783-ETAP2F?
A: The unit measures approximately 35 × 105 × 131 mm and weighs approximately 0.20 kg, making it suitable for compact DIN rail installations inside industrial control panels.

Q7: What environmental conditions can the 1783-ETAP2F withstand?
A: The device operates in temperatures from -25°C to +60°C, supports 5–95% non-condensing humidity, and is designed for industrial environments with vibration and shock resistance.

Q8: What should be checked before installing the 1783-ETAP2F?
A: Before installation, verify the 24 VDC power supply, fiber type and LC connector compatibility, Ethernet cable specifications, DLR network configuration, grounding, and DIN rail mounting location. After installation, confirm port status LEDs, fiber link integrity, and communication with connected EtherNet/IP devices.

1783-ETAP2F Allen Bradley

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.