Bently Nevada 330780-50-00 3300 XL 11 mm Proximitor Sensor

Frequently Asked Questions (FAQ)

Q1: Is the 330780-50-00 sensor backward-compatible with the older 7200 series?
A1: No, all components of the 3300 XL 11 mm system must be used together; 7200 series components are not compatible.

Q2: What is the sensitivity of the output signal?
A2: The output sensitivity is 3.94 V/mm (100 mV/mil) ±10%.

Q3: What is the recommended gap between the probe and the target?
A3: The recommended gap is 2.5 mm (100 mils).

Q4: Can it be used for axial position and Keyphasor measurements?
A4: Yes, it is suitable for axial position, Keyphasor, speed, and thrust measurements.

Q5: What is the maximum field wiring length supported?
A5: Up to 305 meters (1,000 feet), depending on signal frequency.

Q6: Is this product suitable for use in humid environments?
A6: Yes, with proper connector protection to prevent water ingress.

Q7: Can the sensor operate in high EMI environments?
A7: Yes, it features enhanced EMI/RFI immunity and meets CE requirements.

Q8: Is hazardous area certification available?
A8: Yes, it has multiple ATEX, IECEx, and North American hazardous area certifications (ia, nA, ec types).

3300 XL 11 mm Proximitor Sensor 330780-50-00 Bently Nevada

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.