Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | IC695CHS012 |
| Product Type | RX3i 12-Slot Universal Backplane |
| Number of Slots | 12 |
| Bus Type | Dual Bus: PCI-based and Serial |
| Slot 0 Compatibility | IC695 Power Supply only |
| Expansion Slot | Slot 12, for IC695LRE001 Serial Expansion Module only |
| Compatible Modules | IC695, IC694, IC693 series modules |
| Grounding | Integrated grounding bar with M3 screw support |
| Terminal Strip | TB1 for isolated +24VDC input (terminals 7 and 8) |
| Slot Labeling | Printed on backplane for module configuration reference |
| Mounting Orientation | Horizontal mounting only |
| Minimum Clearance for Cooling | 102 mm (4 inches) on all sides |
| Operating Conditions | Must be enclosed in protective housing (IP20 or NEMA Type 1) |
| Dimensions (W x L x H) | 141.48 x 457.45 x 147.32 mm |
| Weight | 1.58 kg |
FAQ
Frequently Asked Questions (FAQ)
Q1: How many modules can be installed on the IC695CHS012 base?
A1: Up to 12 modules can be installed, with slot 0 reserved for a power supply and slot 12 reserved for expansion.
Q2: Can the IC695CHS012 support both PCI and Serial modules?
A2: Yes, each slot (except slot 0 and 12) has dual connectors for PCI-based and serial modules.
Q3: Can the CPU be installed in any slot?
A3: The CPU can be installed in any slot except slot 12. CPU modules occupy two slots.
Q4: Is hot-swapping supported for I/O modules?
A4: Yes, as long as the hot installation procedure is strictly followed per system manual GFK-2314.
Q5: What type of power supplies are compatible with slot 0?
A5: Only IC695 power supplies are compatible. IC694 and IC693 power supplies are not supported.
Q6: How is grounding handled in the base?
A6: A grounding bar is integrated into the backplane, allowing module shields to be grounded via M3 screws.
Q7: What precautions are required for hazardous location installation?
A7: Ensure power is off before wiring or module replacement, and only use in Class I, Division 2 approved areas.
Q8: Can AC power supplies be used when the CPU is installed in slot 1?
A8: No, if the CPU is in slot 1, only a single-width DC power supply can be used in slot 0. AC supplies must be placed elsewhere.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
