Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Linear Measurement Range | 2 mm (80 mils) |
| Initial Air Gap | 0.5 mm (20 mils) |
| Incremental Scale Factor (ISF) | 8 V/mm (203.2 mV/mil) ±5% (0 to +45°C) |
| Deviation from Best Fit Line (DSL) | ±0.025 mm (±1 mil) (0 to +45°C) |
| Minimum Shaft Diameter | 25 mm (0.98 in) |
| Target Material | 42CrMo4 (AISI/SAE 4140), others on request |
| Protection Class | IP66 (IEC 60529) |
| Operating Temperature (Sensor + Cable) | -35°C to +180°C (-31°F to 356°F) |
| Operating Temperature (Cable & Connector) | -35°C to +150°C (-31°F to 302°F) |
| Sensor Tip Material | PEEK (Polyether Ether Ketone) |
| Case Material | Stainless Steel |
| Cable Material | PTFE (Polytetrafluoroethylene) |
| Connector Material | Nickel-plated Brass |
| Weight (Sensor + 1m Cable) | Approx. 100 g (0.1 kg) |
| Sensor Head Diameter | 8 mm |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the measurement range of the PR6423/011-000 sensor?
A1: The linear measurement range is 2 mm (80 mils).
Q2: What is the initial gap required for optimal performance?
A2: The initial air gap is 0.5 mm (20 mils).
Q3: What is the minimum shaft diameter this sensor can detect?
A3: The minimum measurable shaft diameter is 25 mm (0.98 in).
Q4: What materials is the sensor made from?
A4: The sensor tip is PEEK, the case is stainless steel, the cable is PTFE, and the connector is nickel-plated brass.
Q5: What are the operating temperature limits of the sensor?
A5: The sensor can operate between -35°C and +180°C.
Q6: Does the sensor have hazardous area certifications?
A6: Yes, it is compliant with ATEX, IEC-Ex, and CSA standards for intrinsic safety and non-sparking applications.
Q7: What is the deviation from linearity (DSL) of this sensor?
A7: It is ±0.025 mm (±1 mil) over the temperature range of 0 to +45°C.
Q8: What is the weight and size of the sensor head?
A8: The sensor head is 8 mm in diameter and weighs approximately 0.1 kg including 1m cable.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
