Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Sensor Type | Non-contact Eddy Current Sensor |
| Measurement Range | 2.0 mm (Standard), 8 V/mm ±5% (ISF) |
| Initial Air Gap | 0.5 mm (20 mils) |
| Linearity Deviation | ±0.025 mm (±1 mil) |
| Minimum Shaft Diameter | 25 mm (0.79 in) |
| Target Material | 42CrMo4 (AISI/SAE 4140) |
| Sensor Tip Material | PEEK (Polyether Ether Ketone) |
| Case Material | Stainless Steel |
| Cable Material | PTFE (Polytetrafluoroethylene) |
| Connector Material | Brass, nickel-plated |
| Operating Temp. (Sensor) | -35°C to +180°C |
| Operating Temp. (Cable) | -35°C to +150°C |
| Protection Class | IP66 |
| Compliance | CE, ATEX, IEC-Ex, CSA, UL (see datasheet for detailed certifications) |
| Output Voltage Range | -2 V to -18 V / -4 V to -20 V (via CON021) |
| Frequency Response | 0–20000 Hz (via CON021) |
| Converter Supply Voltage | -21 V to -32 V / -23 V to -32 V |
| Weight (Sensor) | Approx. 0.10 kg |
| Weight (Converter) | Approx. 0.12 kg |
| Sensor Head Diameter | 8 mm |
| Mounting (Converter) | Panel mount with 4 × M5x20 screws |
FAQ
FAQ
Q1: What type of machinery is the PR6423/005-030 + CON021 combination suitable for?
A1: It is suitable for critical rotating machinery such as steam turbines, gas turbines, hydro turbines, compressors, gearboxes, pumps, and fans.
Q2: What is the typical linear measurement range of the PR6423 sensor?
A2: The linear measurement range is 2.0 mm as standard when used with the CON021 signal converter.
Q3: Does the sensor have hazardous area certifications?
A3: Yes, the system is certified for use in hazardous areas under ATEX, IECEx, CSA, and UL standards.
Q4: What is the operating temperature range for the sensor and converter?
A4: The sensor operates from -35°C to +180°C; the converter from -30°C to +100°C.
Q5: What is the output voltage of the PR6423 sensor system?
A5: Depending on the converter model, the output voltage is either -2 to -18V or -4 to -20V.
Q6: Can the sensor monitor shaft eccentricity or displacement?
A6: Yes, it accurately monitors radial/axial shaft dynamic displacement, position, and eccentricity.
Q7: Is the cable length customizable?
A7: Yes, standard options include 4m, 5m, 8m, 9m, 10m, and more depending on model configuration.
Q8: What is the weight of the device?
A8: The sensor (with 1-meter cable) weighs approximately 0.10 kg; the signal converter weighs around 0.12 kg.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
