Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | 330101-00-52-10-12-05 |
| Probe Type | 3300 XL 8 mm Proximity Probe |
| Probe Tip Material | PPS (Polyphenylene Sulfide) |
| Probe Case Material | Stainless Steel AISI 303 or 304 |
| Cable Type | 75Ω triaxial, FluidLoc coating |
| Connector Type | Miniature coaxial ClickLoc, gold-plated |
| Mounting Thread | 3/8-24 UNF |
| Total Length | 1.0 meter |
| Weight | 0.323 kg |
| Linear Range | 2 mm (80 mils) |
| Recommended Gap Voltage | -9 VDC (approx. 1.27 mm or 50 mils) |
| Scale Factor | 7.87 V/mm (200 mV/mil) ±5% |
| DSL (Best Fit Line Deviation) | < ±0.025 mm (±1 mil) |
| Frequency Response | 0 to 10 kHz (+0, -3 dB) |
| Minimum Target Size | 15.2 mm (0.6 in) diameter |
| Minimum Shaft Diameter | 50.8 mm (2 in); recommended ≥ 76.2 mm (3 in) |
| Temperature Range (Probe) | -52°C to +177°C (standard) |
| Temperature Range (FluidLoc Cable) | -51°C to +260°C |
| Pressure Rating | Viton® O-ring sealing; not pressure tested |
| Probe Pull Strength | 330 N (75 lbf) from case to cable |
| Environmental Protection | RFI/EMI immune, CE compliant, IP54 with connector protector |
| Certifications | SIL 2/3, CSA, ATEX, IECEx, RoHS, EMC |
FAQ
FAQ
Q1: Can this probe replace older 8 mm or 5 mm models directly?
A1: Yes. The 3300 XL 8 mm probe is fully electrically and mechanically compatible with legacy 3300-series 5 mm and 8 mm probes.
Q2: Is the model compliant with API 670 standard?
A2: Yes. It meets API 670 mechanical configuration, linear range, accuracy, and temperature stability requirements.
Q3: What is the recommended installation gap?
A3: The recommended gap is -9 VDC, which corresponds to approximately 1.27 mm (50 mils) from the target surface.
Q4: Can this probe operate in high-temperature environments?
A4: Yes. The standard probe supports up to 177°C, and the FluidLoc cable supports up to 260°C.
Q5: Is this product suitable for marine or hazardous area installations?
A5: Yes. It has CSA, ATEX, and IECEx approvals for Class I Zone 0/1/2 hazardous areas.
Q6: What is the required mounting torque for the probe?
A6: For standard forward-mounted probes, the recommended torque is 11.2 N·m (100 in·lbf), with a maximum of 33.9 N·m.
Q7: Is system calibration needed during installation?
A7: No. All components are fully interchangeable and factory calibrated; no field calibration is necessary.
Q8: What are the advantages of the FluidLoc cable?
A8: The FluidLoc cable prevents oil or liquid ingress through the cable core, improving reliability and environmental sealing.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
