Epro PR6423/011-110+CON021 8mm Eddy Current Sensor+Signal Converter

FAQ

Q1: What applications is the PR6423/011-110 sensor designed for?
A1: It is designed for critical rotating machinery such as turbines, compressors, pumps, gearboxes, and fans to measure shaft displacement and eccentricity.

Q2: What installation precautions are required for the PR6423 sensor?
A2: Ensure a clean mounting surface, proper alignment, and set the initial gap to approximately 0.5 mm for optimal performance.

Q3: Is the CON021 converter hot-swappable?
A3: No, hot-swapping is not supported. Always connect or disconnect under power-off conditions to avoid equipment damage.

Q4: Can the sensor operate in high-temperature environments?
A4: Yes, the PR6423 can function reliably in temperatures up to 180°C, making it suitable for most industrial applications.

Q5: Which converters are compatible with PR6423?
A5: It is compatible with CON021 series converters, especially those configured for 2 mm standard range.

Q6: How do I choose the correct PR6423 model?
A6: Selection depends on installation conditions including thread type (M10 or 3/8-24UNF), armored cable needs, mounting orientation, and cable length.

Q7: Is the output voltage range adjustable?
A7: No, the output range is fixed based on the supply voltage and cannot be externally adjusted.

Q8: What shaft materials are recommended?
A8: Use ferromagnetic materials such as 42CrMo4 (AISI 4140). Non-standard materials may impact accuracy.