Bently Nevada 330101-00-79-10-02-05 3300 XL 8 mm Proximity Probe

FAQ

Q1: What are the typical applications of this probe?
A1: It is commonly used for vibration and position monitoring on fluid-film bearing machines, as well as for Keyphasor and speed measurements.

Q2: Does this model comply with API 670?
A2: Yes, the standard 5-meter system meets API 670 standards for mechanical configuration, linear range, accuracy, and temperature stability.

Q3: Do the probe and extension cable need to be calibrated together?
A3: No, all components are fully interchangeable and factory calibrated, eliminating the need for matching or bench calibration.

Q4: Is it suitable for high-temperature applications?
A4: The standard probe supports up to +177°C. For higher temperatures, use the ETR version which supports up to +218°C.

Q5: Does the probe prevent oil leakage?
A5: The optional FluidLoc cable helps prevent oil or liquid leakage through the interior of the cable.

Q6: Are special tools required for installation?
A6: No, the ClickLoc connectors are designed to be hand-tightened and do not require special tools.

Q7: Is it compatible with older 3300 series components?
A7: Yes, it is electrically and physically interchangeable with legacy 3300 5 mm and 8 mm series components.

Q8: What is the minimum recommended target size?
A8: The minimum target diameter is 15.2 mm (0.6 in), and recommended shaft diameter is at least 76.2 mm (3 in).