Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | IC660BBA101 |
| Input Type | RTD (Platinum, Nickel, Copper) |
| Channels | 6 channels (in 3 isolated groups of 2 circuits each) |
| Isolation (Group to Group) | 300 V |
| Isolation (Block to Block) | 1500 V |
| Input Resolution | 0.1°C |
| Accuracy at 25°C | ±0.5°C typical (Platinum/Nickel), ±5°C typical (Copper) |
| Linearization Types | DIN 43760 Platinum/Nickel, Copper, Linear |
| Resistance Range | 0–5000 Ohms |
| Update Frequency | Every 400 ms, 800 ms, or 1600 ms |
| Input Filter Time | Configurable: 400, 800, or 1600 ms |
| Diagnostic Functions | Input short, internal fault, wiring error, open wire, over/under range, high/low alarms |
| Power Supply | 115 VAC / 125 VDC |
| Power Supply Voltage | 93–132 VAC @ 47–63 Hz, or 105–145 VDC |
| Power Consumption | 7 W max |
| LEDs | Unit OK, I/O Enabled |
| Size (H x W x D) | 224.4 × 88.9 × 100 mm |
| Weight | 1.8 kg |
| Compatibility | IC66*HHM501D handheld monitor (v3.5+), IC697/IC600/IC550 PLCs |
FAQ
FAQ
Q1: What types of RTDs are supported by the IC660BBA101?
A1: It supports platinum, nickel, and copper RTDs with automatic linearization based on the selected type.
Q2: Does the module offer group-to-group isolation?
A2: Yes, it offers 300V isolation between each of the three input groups.
Q3: What is the input accuracy?
A3: At 25°C, platinum/nickel RTDs have ±0.5°C typical accuracy; copper RTDs have ±5°C typical accuracy.
Q4: How often are inputs updated?
A4: Input update rates can be configured to 400 ms, 800 ms, or 1600 ms.
Q5: Does it support self-diagnostics?
A5: Yes, it provides input short, open wire, wiring error, internal fault, over/under range, and high/low alarm diagnostics.
Q6: What are the power requirements?
A6: It requires either 115 VAC or 125 VDC and consumes up to 7 W.
Q7: What are its dimensions and weight?
A7: The dimensions are 224.4 × 88.9 × 100 mm, and it weighs 1.8 kg.
Q8: Is recalibration required after installation?
A8: No, the module is factory-calibrated and does not require recalibration.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
