Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Description |
|---|---|
| Model Number | 330101-13-37-10-02-05 |
| System Type | 3300 XL 8 mm Proximity Probe |
| Linear Range | 2 mm (80 mils), approx. –1 to –17 Vdc |
| Recommended Gap Voltage | -9 Vdc (approx. 1.27 mm or 50 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) ±5% (5m/1m) ±6.5% (9m) |
| Deviation from Best Fit Line | ≤ ±0.025 mm (±1 mil) for 1/5m, ≤ ±0.038 mm (±1.5 mils) for 9m |
| Frequency Response | 0 to 10 kHz, +0, -3 dB |
| Probe Tip Material | PPS (Polyphenylene sulfide) |
| Probe Case Material | AISI 303 or 304 stainless steel |
| Probe Cable | 75 Ω triaxial, FEP insulated (standard); PFA for extended temperature |
| Minimum Target Size | 15.2 mm (0.6 in) diameter (flat target) |
| Minimum Shaft Diameter | 50.8 mm (2 in), recommended ≥ 76.2 mm (3 in) |
| Probe Operating Temperature | -52°C to +177°C (standard), up to +218°C for ETR tip |
| Extension Cable Temp. Range | -52°C to +177°C (standard), up to +260°C for ETR cable |
| Proximitor Sensor Temp. Range | Operating: -52°C to +100°C; Storage: -52°C to +105°C |
| Relative Humidity Resistance | <3% change in ASF @ 93% humidity (IEC 68 2 3) for 56 days |
| Pressure Seal | Viton® O-ring, not pressure tested |
| Probe Cable Pull Strength | 330 N (75 lbf) |
| Total Length | 1.0 meter |
| Total Weight | 0.323 kg |
FAQ
FAQ
Q1: What is the recommended gap setting for the 330101-13-37-10-02-05 probe?
A1: The recommended gap is approximately 1.27 mm (50 mils), corresponding to a -9 Vdc output.
Q2: Is this probe suitable for high-temperature environments?
A2: Yes, the ETR version supports probe temperatures up to +218°C and cable temperatures up to +260°C.
Q3: What is the configured length of this probe model?
A3: This model is configured to a total length of 1.0 meter and does not require an extension cable.
Q4: Is the probe sensitive to power supply fluctuations?
A4: No, it is designed with supply sensitivity less than 2 mV per volt of input variation.
Q5: Does this system require matched calibration of components?
A5: No, the 3300 XL system supports complete interchangeability without matching or bench calibration.
Q6: What is the maximum pull strength the probe can withstand?
A6: The probe can withstand up to 330 N (75 lbf) between the probe body and cable.
Q7: Is the probe affected by 60 Hz magnetic field interference?
A7: It has excellent immunity; the maximum effect is around 0.0348 mil pp/Gauss depending on gap.
Q8: Does temperature variation impact measurement accuracy?
A8: Yes, but within -35°C to +120°C, the ISF remains within ±10% and DSL within ±0.076 mm (±3 mils).
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
