Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | AAI543-H50/A4S00 |
| Output Signal | 4 to 20 mA DC |
| Number of Output Channels | 16 channels, isolated |
| Redundancy Support | Yes, standard switch-over response in redundant configuration |
| Circuit-open Detection | < 0.65 mA |
| Accuracy | ±48 µA |
| Data Update Period | 10 ms |
| Temperature Drift | ±16 µA / 10 °C |
| Allowable Load Resistance | 0 to 750 Ω |
| Withstanding Voltage | 1500 V AC (between output and system, 1 minute) |
| External Communication | Pressure clamp terminal, MIL connector cable, KS1 cable |
| HART Communication | Supported (Firmware rev. 2 or later required) |
| Maximum Current Consumption | 230 mA (5 V DC), 540 mA (24 V DC) |
| Dimensions (W × D × H) | 107.5 × 32.8 × 130 mm |
| Weight | 0.4 kg |
FAQ
FAQ
Q1: Does this module support HART communication?
A1: Yes, the AAI543-H50/A4S00 supports HART communication when used with compatible ER bus node units and EB401 firmware revision 2 or later.
Q2: Which control units is this module compatible with?
A2: It is compatible with field control units supporting FIO, such as AFV30S, AFV40S, and AFF50S.
Q3: How is redundancy handled with this module?
A3: Redundancy is achieved by installing two identical modules in adjacent slots (odd and even numbers) on the same node unit.
Q4: Does it have circuit-open detection?
A4: Yes, it detects circuit-open conditions when the output current drops below 0.65 mA.
Q5: Is the module isolated?
A5: Yes, each output channel is electrically isolated from the system.
Q6: Can this module operate in high-temperature environments?
A6: Yes, with G3 option models, it supports operation from -20°C to 70°C.
Q7: What is the allowable load resistance?
A7: It supports load resistance from 0 to 750 Ω.
Q8: How is external connection performed?
A8: External devices can be connected via pressure clamp terminals (A4S00), MIL connector cables, or KS1 cables.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
