Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | Bently Nevada 330180-X1-CN 145004-67 3300 XL Proximitor Sensor |
| System Compatibility | Works with 3300-series 5 mm, 3300 XL 8 mm Proximity Probes and Extension Cables |
| Power Supply | -17.5 Vdc to -26 Vdc (non-incendive circuit), -23 Vdc to -26 Vdc (with barriers), max 12 mA |
| Output Resistance | 50 Ω |
| Linear Range | 2 mm (80 mils) |
| Recommended Gap | -9 Vdc (approx. 1.27 mm / 50 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) ± 5% (1 m & 5 m systems), ± 6.5% (9 m systems) |
| DSL (Deviation from Straight Line) | ≤ ±0.025 mm (±1 mil) for 1 m & 5 m systems, ≤ ±0.038 mm (±1.5 mils) for 9 m systems |
| Frequency Response | 0 to 10 kHz, +0/-3 dB (up to 305 m field wiring) |
| Minimum Target Size | 15.2 mm (0.6 in) diameter |
| Shaft Diameter | Min. 50.8 mm (2 in), recommended ≥ 76.2 mm (3 in) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel |
| Cable Type | 75Ω triaxial, FEP insulated (standard) / PFA insulated (ETR) |
| Tensile Strength | 330 N (probe case to lead), 270 N (lead to extension cable) |
| Connector Material | Gold-plated brass or beryllium copper |
| Proximitor Sensor Material | A308 aluminum |
| Operating Temperature | Probe: -52°C to +177°C (standard), up to +218°C / +260°C (ETR); Proximitor Sensor: -52°C to +100°C |
| Storage Temperature | Probe: same as operating; Proximitor Sensor: -52°C to +105°C |
| Humidity | ≤ 3% ASF change at 93% RH (IEC 68-2-3, 56 days) |
| Dimensions | 81.3 × 35.1 × 63.5 mm |
| Weight | 0.246 kg |
FAQ
FAQ
Q1: Is this model compatible with non-XL 3300 series probes?
A1: Yes, the 330180-X1-CN is electrically and physically compatible with non-XL 3300 series 5 mm and 8 mm components, but performance will be limited to the non-XL system specifications.
Q2: What is the recommended installation gap?
A2: The recommended gap is -9 Vdc, approximately 1.27 mm (50 mils).
Q3: What is the minimum applicable shaft diameter?
A3: The minimum shaft diameter is 50.8 mm (2 inches), with 76.2 mm (3 inches) or greater recommended for accuracy.
Q4: What is the operating temperature range for this product?
A4: Standard probe: -52°C to +177°C; ETR probe: up to +218°C (tip) and +260°C (cable). Proximitor Sensor: -52°C to +100°C.
Q5: Does high humidity affect accuracy?
A5: When tested at 93% relative humidity for 56 days, the Average Scale Factor (ASF) changes by less than 3%.
Q6: Are special tools required for terminal strip wiring?
A6: No, the SpringLoc terminal strips require no special tools and allow quick, secure wiring.
Q7: What is the frequency response range?
A7: Frequency response is 0 to 10 kHz, +0/-3 dB, supporting up to 305 meters of field wiring.
Q8: Does the product comply with API 670?
A8: Yes, the standard 5 m system fully complies with API 670 requirements for mechanical configuration, linear range, accuracy, and temperature stability.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
