Bently Nevada 170133-090-00 Internal Proximitor (Proximitor) Module

FAQ

Q1: What is the primary function of the 170133‑090‑00 module?
A1: It conditions the signals from 3300 proximity probes within the 1701 FieldMonitor system, converting gap/vibration into usable outputs and enabling fault detection.

Q2: What probe types does it accept?
A2: It supports 3300 series proximity probes of 5 mm or 8 mm diameters.

Q3: What is the output scaling factor?
A3: The standard scale factor is 200 mV per mil of gap (≈ 7.87 mV per µm).

Q4: What is the calibration (measurement) range?
A4: The calibration (valid measurement) range is 250 µm to 2250 µm, or 10 to 90 mil.

Q5: What is the frequency bandwidth of this module?
A5: It supports signal bandwidth up to approximately 12.5 kHz, with the –3 dB point around a 50 mil gap.

Q6: What are its dimensions and weight?
A6: Dimensions are about 12.5 cm × 2.1 cm × 10.5 cm, and it weighs approximately 0.320 kg.

Q7: In what environmental range can it reliably operate?
A7: It is rated for –34 °C to +85 °C in operation, and –40 °C to +85 °C in storage.

Q8: How does the module detect probe faults?
A8: It signals fault conditions (open/short) by shifting the output near 1 V common, alerting the monitoring system to probe or module issues.

170133-090-00 Bently Nevada Internal Proximitor (Proximitor) Module

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.