Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613950166376 | ||
| +8613950166376 | |||
| 13950166376 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | Allen-Bradley |
| Model | 20DC015A0EYNANANE |
| Product Type | PowerFlex 700S AC Drive |
| Drive Series | PowerFlex 700S, 20D |
| Input Voltage | 400 V AC |
| Input Phase | 3-phase |
| Input Configuration | 6-pulse AC input |
| Rated Output Current | 15.4 A continuous |
| Output Current, 1 min | 17.2 A |
| Output Current, 3 sec | 23.1 A |
| Normal Duty Power | 7.5 kW / 10 HP |
| Heavy Duty Power | 5.5 kW / 7.5 HP |
| Frame Size | Frame 1 |
| Maximum Output Frequency | Application- and configuration-dependent; verify in the manual |
| Control Method | Phase II vector control with field-oriented control |
| Selectable Motor Control | Vector Control, Sensorless Vector, and V/Hz, depending on configuration |
| Carrier Frequency | 2, 4, 6, 8, and 10 kHz; rated at 4 kHz |
| Digital Inputs | Configuration-dependent; verify the installed control I/O |
| Digital Outputs | Configuration-dependent; verify the installed control I/O |
| Analog Inputs | Configuration-dependent; verify the installed control I/O |
| Analog Outputs | Configuration-dependent; verify the installed control I/O |
| Feedback | Standard incremental encoder |
| Internal Communication Module | No embedded communication module |
| Communication Options | ControlNet coax DPI communication module specified by this catalog configuration |
| Brake IGBT | Installed |
| Internal Brake Resistor | Not included |
| EMC Filtering | EMC filter with common-mode choke |
| Conformal Coating | Yes |
| Enclosure | IP20 / NEMA Type 1 |
| Maximum Circuit Breaker Rating | 60 A at 400 V AC, 3-phase |
| DC Bus Nominal Voltage | Approximately 540 V DC at 380–400 V AC input |
| Displacement Power Factor | 0.98 across speed range |
| Current Limit | Programmable; Phase II control supports independent motoring and regenerative power limits |
| Acceleration / Deceleration | Independently programmable from 0 to 6553.5 seconds, in 0.1-second increments |
| Motor Overload Protection | Configurable through drive parameters; verify the applicable motor protection settings |
| Operating Temperature | Refer to the PowerFlex 700S installation manual for the applicable rating |
| Degree of Protection | IP20 |
| Human Interface Module (HIM) | No HIM, blank plate |
| Dimensions (H × W × D) | 336 × 166.9 × 200 mm |
| Weight | 7.03 kg |
| Country of Origin | Mexico |
| Product Status | Discontinued; June 30, 2023 |
FAQ
FAQ
Q1: What is the Allen-Bradley 20DC015A0EYNANANE?
A: The Allen-Bradley 20DC015A0EYNANANE is a PowerFlex 700S AC drive with Phase II control. It is designed for industrial motor speed and torque control and supports advanced field-oriented control capabilities.
Q2: What are the input voltage, output current, and power ratings?
A: This drive is rated for 400 V AC, three-phase input and 15.4 A continuous output current. Its normal-duty rating is 7.5 kW / 10 HP, while its heavy-duty rating is 5.5 kW / 7.5 HP.
Q3: What control methods does the 20DC015A0EYNANANE support?
A: The PowerFlex 700S Phase II control platform supports field-oriented vector control and configurable motor-control strategies. Available modes depend on the motor type and drive configuration. Refer to the applicable programming manual before commissioning.
Q4: Does this drive support encoder feedback?
A: Yes. This catalog configuration specifies a standard incremental encoder feedback option. Verify encoder type, wiring, and feedback configuration before connecting the motor feedback device.
Q5: Does the 20DC015A0EYNANANE include braking hardware?
A: The drive includes a brake IGBT but does not include an internal brake resistor. If the application requires dynamic braking, select a compatible external resistor according to the drive manual and the required braking duty.
Q6: What communication options are available?
A: This configuration specifies a ControlNet coax DPI communication module. It does not have embedded communication, so confirm the installed module and network requirements before integrating the drive into an automation system.
Q7: What are the dimensions and weight of this drive?
A: The listed dimensions are 336 × 166.9 × 200 mm (H × W × D), and the drive weight is 7.03 kg. Allow additional clearance for wiring, ventilation, and service access when installing it in a control cabinet.
Q8: Is the 20DC015A0EYNANANE still available?
A: The PowerFlex 700S 20D series was discontinued by Rockwell Automation effective June 30, 2023. For replacement, verify the voltage, current, motor power, encoder feedback, braking hardware, communication interface, and mechanical dimensions before selecting an alternative.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
