Bently Nevada 200350-02-00-00 Case‑mounted seismic accelerometer

FAQ

Q1: What is the 200350‑02‑00‑00 used for?
A1: It is used for measuring vibration acceleration on industrial machinery and feeding that signal into condition monitoring or protection systems.

Q2: What is the sensitivity of this accelerometer?
A2: The sensitivity is 100 mV per g, with a tolerance of ±20 %.

Q3: What is the operating frequency range?
A3: It operates from about 0.5 Hz up to 10 kHz (30 to 600,000 cycles per minute).

Q4: What supply voltage does it require?
A4: It requires 18 to 28 V DC under constant current excitation (2 to 20 mA), and the output bias is 8 to 12 V.

Q5: What are its physical dimensions and weight?
A5: The height is 42.4 mm, the hex flats measure 18 mm, and the unit weighs approximately 51 g.

Q6: What temperature range can it operate over?
A6: It can operate from –54 °C to +121 °C.

Q7: How rugged is this sensor in terms of shock and environment?
A7: It can survive shocks up to 5,000 g and is hermetically sealed with an IP68 rating for harsh environments.

Q8: What mounting and connection form does it use?
A8: It mounts using a ¼‑28 to M8 x 1.25 BeCu stud adapter (version “02”) and uses a top‑exit 2‑pin MIL‑C‑5015 connector.

200350-02-00-00 Bently Nevada

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.