Epro CON021+PR6424/001-030 16mm Eddy Current Sensor

FAQ

Q1: How does the CON021+PR6424/001-030 handle signal noise in industrial environments?
A1: The sensor’s eddy current principle inherently rejects low-frequency mechanical noise, and proper shielding with the amplifier ensures stable readings in electrically noisy environments.

Q2: Can this sensor be used to measure vibration as well as displacement?
A2: Yes, when connected to a compatible high-speed amplifier, it can capture both static displacement and dynamic vibration signals for monitoring rotating machinery.

Q3: What happens if the target material is not conductive?
A3: The sensor relies on eddy currents induced in conductive materials. Non-conductive targets will not generate a signal, so a conductive surface is required for proper operation.

Q4: Is the sensor affected by temperature fluctuations during operation?
A4: The sensor is designed to operate accurately across a wide temperature range. Temperature-induced drift is minimized when used with the corresponding PR6424 amplifier with compensation features.

Q5: Can multiple sensors be used on the same machine simultaneously?
A5: Yes, multiple sensors can be installed to monitor different points. Each sensor should be paired with a separate amplifier input or a multi-channel amplifier to avoid signal interference.

Q6: How does the sensor indicate a malfunction or misalignment?
A6: The self-check diagnostics, via the connected amplifier, can detect open circuits, short circuits, or misalignment, providing early warning for maintenance.

Q7: What is the recommended distance between the sensor and the target?
A7: The optimal sensing range is ±4 mm from the target. Operating outside this range may reduce linearity and accuracy.

Q8: Does the sensor require calibration before use?
A8: Yes, initial calibration with the compatible amplifier ensures linearity and accuracy. Periodic recalibration may be necessary depending on environmental conditions and machinery use.

16mm Eddy Current Sensor CON021+PR6424/001-030 Epro Epro CON021+PR6424/001-030 PR6424/001-030

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.