Honeywell 05701-A-0511 19-inch Rack

FAQ (Frequently Asked Questions)

Q1: What is the maximum cable length supported for sensors?
A1: Depends on sensor type and cable resistance (e.g., 2500m for 2.5mm² cable with catalytic sensors). Refer to the line resistance guide in the manual.

Q2: Can the rack be mounted in hazardous areas?
A2: No. The 05701-A-0511 is designed for indoor use in non-hazardous areas only.

Q3: How do I upgrade the AC/DC power supply unit?
A3: Add 50W Switched Mode Modules (P/N 05701-A-0440) to increase capacity up to 200W.

Q4: Are relay outputs configurable as normally energized/de-energized?
A4: Yes. Use the Engineering Interface Software to configure relay states.

Q5: What sensors are compatible with this rack?
A5: Catalytic (e.g., 780 Series) and 4–20mA sensors (e.g., Searchline Excel).

Q6: How do I reset a latched alarm?
A6: Press the channel card’s RESET/SELECT button momentarily.

Q7: Can I mix catalytic and 4–20mA cards in the same rack?
A7: Yes, provided each card uses the correct Sensor Drive Module.

Q8: What is the operating temperature range?
A8: 0°C to 55°C (ensure adequate ventilation for high-density configurations).

Q9: How do I replace a faulty control card?
A9: Power off the rack, remove the card using the extraction tool, and insert a replacement.

Q10: Does the rack support Modbus communication?
A10: Yes, via optional Modbus Interface Modules (P/N 05701M5006/05701M5007).

05701-A-0511 19-inch Rack 5701 Control System Honeywell

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.