Bently Nevada 18745-01 Proximitor Sensor (7200 Series, either 5 mm or 8 mm probe variant)

FAQ

Q1: What is the purpose of the 18745-01 Proximitor sensor?
A1: It is used to measure static and dynamic distances (gap) between a probe tip and a target, typically for shaft position and vibration monitoring in rotating machinery.

Q2: What probe diameter does this model use?
A2: The “-01” variant typically uses a 5 mm diameter probe.

Q3: What is the supply voltage for this sensor?
A3: The sensor is powered by –18 V to –24 V DC.

Q4: What is the scale factor (output sensitivity) of the sensor?
A4: The output is 200 mV per mil of gap, which is approximately 7.87 mV per micrometer.

Q5: What is the linear measurement range?
A5: The sensor has a linear response over approximately 10 to 15 mils (≈ 250 to 380 µm) of gap.

Q6: What is the frequency response of the sensor?
A6: It covers from direct current (0 Hz) up to about 10 kHz.

Q7: What are the physical size and weight of the unit?
A7: Dimensions are circa 81.3 mm × 61.2 mm × 63.5 mm, and the weight is approximately 0.10 kg.

Q8: In what temperature range can the sensor operate?
A8: It is rated for operation from –50 °C to +100 °C, making it suitable for a wide range of industrial environments.

18745-01 Bently Nevada

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.