Bently Nevada 330101-00-60-10-02-05 3300 XL 8 mm Proximity Probe

FAQ

Q1: What is the primary application of the 330101-00-60-10-02-05 probe?
A1: It is used primarily for vibration and position monitoring in fluid-film bearing machines, as well as speed and Keyphasor reference measurements.

Q2: What is the length and weight of this proximity probe?
A2: The probe has a total length of 1.0 meter and weighs approximately 0.323 kg.

Q3: Is this probe compatible with other Bently Nevada systems?
A3: Yes, it is fully compatible and interchangeable with non-XL 3300 5 mm and 8 mm system components.

Q4: What type of connector does the probe use?
A4: It uses a miniature coaxial ClickLoc connector that is finger-tightened and features a locking mechanism.

Q5: What is the probe’s recommended gap setting for radial vibration?
A5: The recommended gap setting is approximately 1.27 mm (50 mils), which corresponds to –9 Vdc output.

Q6: Can this probe operate in high-temperature environments?
A6: Yes, the standard probe supports operation up to +177°C. Extended temperature versions can operate up to +218°C for the tip and +260°C for the cable.

Q7: What is the linear measurement range of this proximity probe?
A7: The linear range is from 0.25 mm to 2.3 mm (10 to 90 mils), supporting both position and vibration measurements.

Q8: Does the probe meet international compliance standards?
A8: Yes, it complies with CE, FCC, CSA, ATEX, IECEx standards, and supports functional safety levels SIL2 and SIL3.

3300 XL 8 mm Proximity Probe 330101 330101-00-60-10-02-05 Bently Nevada

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.