Bently Nevada 330102-00-60-10-01-05 3300 XL 8 mm Proximity Probe New In Stock

FAQ

• Q: What is the required target material for this probe to achieve specified performance?

  • A: The probe is calibrated for use with AISI 4140 steel or other materials with similar electromagnetic properties.

• Q: What is the maximum cable length that can be used with this transducer?

  • A: The system is designed for a fixed cable length. The 1.0-meter integral cable should not be extended, as this will alter calibration and system performance.

• Q: Can this probe be used for measuring the vibration of brass or aluminum shafts?

  • A: No, it is not recommended. The probe is calibrated for steel targets. Measurements on non-ferrous materials like brass or aluminum will be inaccurate due to different material conductivity and permeability.

• Q: What is the purpose of the gap voltage output?

  • A: The gap voltage (the average DC voltage between the output signal and common) is directly proportional to the average distance between the probe tip and the target. It is used for setting the initial mechanical gap.

• Q: How is the probe’s sensitivity defined?

  • A: Sensitivity is 200 mV/mil (7.87 V/mm). This means that for every 1 mil (0.001 inch) of target displacement, the output AC voltage will change by 200 millivolts.

• Q: What is the recommended installation gap (air gap) for this probe?

  • A: The optimal installation gap is typically between 0.76 mm and 1.02 mm (30 to 40 mils) from the target when the system is powered. This target gap ensures the probe operates within its linear range.

• Q: Is this probe intrinsically safe for use in hazardous environments?

  • A: The probe itself is a passive sensor. The intrinsic safety of the entire system depends on the associated power supply and monitor (e.g., 3300/20 or 3300/25 rack) being certified for such environments.

• Q: What is the physical construction of the probe tip?

  • A: The probe tip is constructed from a temperature-stable, wear-resistant PPS (Polyphenylene Sulfide) housing that encapsulates the sensing coil.

3300 XL 8 mm Proximity Probe 330102-00-60-10-01-05 Bently Nevada Bently Nevada 330102-00-60-10-01-05

We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.

For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.

Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.